Urban heat island
The Urban Heat Island (UHI) effect is the term given to localised higher temperatures that are experienced in urban environments compared with the temperatures of surrounding green spaces (Akbari and Konopacki 2005).
The Urban Heat Island effect is primarily caused by the replacement of natural surfaces with hard impervious surfaces that are generally dark and absorb large amounts of solar radiation. Urban hard surfaces are significant in the built environment in the form of roads, paved areas, and roof tops (Getter, Rowe et al. 2007).
It is estimated that pavements and roofs account for 60% of urban surfaces, roofs 20-25% and pavements approximately 40% (Akbari, Menon et al. 2009). Presently these surfaces have relatively low albedo values (the fraction of incoming radiation reflected by a body) and high thermal conductivities, typically absorbing and re-radiating around 90% of the total incident solar radiation (Wolf and Lundholm 2008). This contributes to an Urban Heat Island effect that can result in a rise in summer temperatures of 4-7°C (CIBSE 2007; Wolf and Lundholm 2008) in comparison with adjacent vegetated areas.
This has a significant impact on thermal comfort in city environments. During a summer heatwave in the UK employers lost an estimated £168 million per day in productivity in one week (Roberts 2008).
In addition to this, heat islands are an energy efficiency concern due to increased air conditioning requirements which raise energy consumption, peak electricity demand and energy prices (Synnefa, Santamouris et al. 2007). Typically, electricity use in cities increases 2-4% for every temperature increase of one degree Celsius (Akbari, Pomerantz et al. 2001) . These costs are likely to increase further if global temperatures rise and increasing urbanisation makes the Urban Heat Island effect more significant.
Hotter urban environments will lead to an increase in the use of air conditioning. It follows that there will be a further increase in city temperatures from the dumping of heat from buildings heating ventilation and air conditioning (HVAC) systems and so more air cooling will be required (Takakura, Kitade et al. 2000). In other words, this process could be described as a vicious circle or negative reinforcing loop. There will also be an impact from increased emissions from cooling if this cooling is provided by fossil fuel based electricity. This will lead to an increased rate of global warming.
Successfully modelling the Urban Heat Island effect is an ongoing process. In the UK this research is looking at the effect in London and is been investigated by University College London (UCL). Their work under the LUCID project is looking at how to develop a Local Urban Climate Model and apply it to the Intelligent Design of Cities.
See also: Cool roofs.
NB The SuDS Manual (C753), published by CIRIA in 2015 refers to the reduction of the urban heat island effect as 'urban cooling'.
This article was originally created by --Buro Happold.
[edit] Related articles on Designing Buildings Wiki
- Albedo.
- Cool roofs.
- Emissivity.
- Green roofs.
- Green space.
- Overheating.
- Preventing overheating.
- Solar reflectance index.
- Smart cities.
- Solar shading.
- Sustainability.
- The benefits of urban trees.
- Thermal comfort.
- Thermal optical properties.
- Types of cool roofs.
[edit] External references
- The LUCID project.
- Akbari, H. and S. Konopacki (2005). "Calculating energy-saving potentials of heat-island reduction strategies." Energy Policy 33(6): 721-756.
- Akbari, H., S. Menon, et al. (2009). "Global cooling: increasing world-wide urban albedos to offset CO2." Climatic Change 94(3): 275-286.
- Akbari, H., M. Pomerantz, et al. (2001). "Cool surfaces and shade trees to reduce energy use and improve air quality in urban areas." Solar Energy 70(3): 295-310.
- CIBSE (2007). Green roofs. Plymouth.
- Erlandsson, M. and M. Borg (2003). Generic LCA-methodology applicable for buildings, constructions and operation services--today practice and development needs. 38: 919-938.
- Utilising green and bluespace to mitigate urban heat island intensity, Gunawardena et al., 2017.
- Getter, K. L., D. B. Rowe, et al. (2007). "Quantifying the effect of slope on extensive green roof stormwater retention." Ecological Engineering 31(4): 225-231.
- Roberts, S. (2008). "Effects of climate change on the built environment." Energy Policy.
- Synnefa, A., M. Santamouris, et al. (2007). "Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions." Energy and Buildings 39(11): 1167-1174.
- Takakura, T., S. Kitade, et al. (2000). "Cooling effect of greenery cover over a building." Energy and Buildings 31(1): 1-6.
- Simulation pathway for estimating heat island influence on urban/suburban building space-conditioning loads and response to facade material changes. Gunawardena et al., 2019.
- Wolf, D. and J. T. Lundholm (2008). "Water uptake in green roof microcosms: Effects of plant species and water availability." Ecological Engineering 33(2): 179-186.
Featured articles and news
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Comments
To start a discussion about this article, click 'Add a comment' above and add your thoughts to this discussion page.